The
M-6 threaded connector allows for the easy, secure
connection of the flow cell into the pump/manifold plumbing of your system.
The threading is standard metric M6 type which forms a tight seal when threaded
into the top of the flow cell. The M6 connector holds a PTFE tube firmly
in place which seals tightly against the internal quartz surface of the
flow cell. Using this design, your sample comes in contact with PTFE and
quartz only. The connection is further stabilized by the use of a stainless
steel ring and neoprene o-ring assembly which keeps the PTFE tubing from
deforming when tightened. Each connector is supplied with 40 cm of PTFE
tubing. The dimensions of the supplied tubing is: 1.6mm OD, 0.8mm ID
| Component |
Area |
Dimension |
| M6
Connector |
Total
height, tall side |
26
mm |
| M6
Connector |
Total
height, short side |
19
mm |
| M6
Connector |
Diameter |
6
mm |
| PTFE
tubing |
Outside
diameter (OD) |
1.6
mm |
| PTFE
tubing |
Inside
diameter (ID) |
0.8
mm |
| PTFE
tubing |
total
length |
400
mm |
|
|
Cells
Reference
materials Mirrors Prisms
lenses coatings